- Tridonic
- Products
- LED drivers
- Filter
- Generation 4
- companionSUITE software
- Outdoor compact dimming
- Outdoor linear IP67/IP66 dimming
- Outdoor linear IP67 fixed output
- Industry linear dimming
- Industry linear fixed output
- Linear dimming SELV
- Linear dimming non-SELV
- Linear fixed output SELV
- Linear fixed output non-SELV
- Compact dimming
- premium series
- excite series
- LC 14 W 100-400 mA o4a NF SC EXC3
- LC 14 W 100-400 mA bDW NF SC EXC3
- LC 28 W 300-700 mA o4a NF SC EXC3
- LC 28 W 300-700 mA bDW NF SC EXC3
- LC 38 W 650-1050 mA o4a NF SC EXC3
- LC 38 W 650-1050 mA bDW NF SC EXC3
- LC 20 W 100–1050 mA o4a NF SR EXC3
- LC 27 W 100–500 mA o4a NF SR EXC3
- LC 45 W 450–1050 mA o4a NF SR EXC3
- advanced series
- essence series
- Tunable White – compact
- Compact fixed output
- in-track dimming
- in-track fixed output
- DC-String
- Constant voltage
- Universal wide voltage (UNV)
- Matter components
- Accessories
- LED modules
- Tunable White
- Emergency Lighting
- Controls and Connectivity
- LED drivers
- Applications
- Connected lighting
- Projects
- Services
- Technical data
- Contact
- Home
- Products
- ►
- LED drivers
- ►
- Compact dimming
- ►
- excite series
- ►
- LC 28 W 300-700 mA o4a NF SC EXC3
Driver LC 28W 300–700mA o4a NFC SC EXC3
excite series
-
-
With strain-relief
-
Product description
- NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
- Can be either used build-in or independent with clip-on strain-relief (see accessory)
- Dimming range 1 to 100 % (min. 5 mA)
- For luminaires of protection class I and protection class II
- Temperature protection as per EN 61347-2-13 C5e
- Adjustable output current between 300 – 700 mA via NFC or DALI
- Max. output power 28 W
- Up to 86 % efficiency
- Lowest power input on stand-by < 0.35 W
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Housing properties
- Casing: polycarbonate, white
- Type of protection IP20
Interfaces
- Near field communication (NFC)
- one4all (DALI-2 DT 6, switchDIM, corridorFUNCTION)
- Terminal blocks: 45° push terminals
Functions
- Adjustable output current in 1-mA-steps (NFC, DALI)
- Constant light output function (CLO)
- Protective features (overtemperature, short-circuit, overload, no-load)
- Suitable for emergency escape lighting systems acc. to EN 50172
Benefits
- Flexible configuration via companionSUITE (NFC, DALI)
- Application-oriented operating window for maximum compatibility
- Best energy savings due to low stand-by losses and high efficiency
- In-field programming possible after installation with NFC interface
Typical applications
- For downlight, spotlight and decorative applications
| Ordering data | ||||
|---|---|---|---|---|
| Type | Article number | Packaging, carton | Packaging, pallet | Weight per pc. |
| LC 28/300-700/42 o4a NF SC EXC3 | 28004042 | 10 pc(s). | 1,150 pc(s). | 0.101 kg |
- Luminaire types:
-
-
-
-
- Approval marks:
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
| Technical data | |
|---|---|
| Rated supply voltage | 220 – 240 V |
| AC voltage range | 198 – 264 V |
| DC voltage range | 176 – 280 V |
| Mains frequency | 0 / 50 / 60 Hz |
| Overvoltage protection | 320 V AC, 48 h |
| Typ. rated current (at 230 V, 50 Hz, full load) (1) (2) | 153 mA |
| Typ. current (220 V, 0 Hz, full load, 15 % dimming level) (2) | 29 mA |
| Leakage current (at 230 V, 50 Hz, full load) (1) (2) | < 250 µA |
| Max. input power | 32.87 W |
| Typ. efficiency (at 230 V, 50 Hz, full load) (2) | 86 % |
| λ (at 230 V, 50 Hz, full load) (1) | 0.97 |
| λ (over full operating range) | 0.47C – 0.97 |
| Typ. power consumption on stand-by (3) | < 0.35 W |
| In-rush current (peak / duration) | 3.31 A / 43 µs |
| THD (at 230 V, 50 Hz, full load) (1) | < 10 % |
| Starting time (AC mode) | < 700 ms |
| Starting time (DC mode) | < 500 ms |
| Switchover time (AC/DC) (4) | < 800 ms |
| Turn off time (at 230 V, 50 Hz, full load) | < 50 ms |
| Output current tolerance (1) (5) | ± 5 % |
| Max. output current peak (non-repetitive) | ≤ output current + 20 % |
| Output LF current ripple (< 120 Hz) | ± 2 % |
| Output P_ST_LM (at full load) | ≤ 1 |
| Output SVM (at full load) | ≤ 0.4 |
| Max. output voltage (U-OUT) | 60 V |
| Dimming range | 1 – 100 % (min. 5 mA) |
| Mains surge capability (between L - N) (6) | 1 kV |
| Mains surge capability (between L/N - PE) | 2 kV |
| Burst protection (7) | 1 kV |
| Burst / surge peaks output side against PE | < 3 kV |
| Ambient temperature ta | -20 ... +50 °C |
| Max. casing temperature tc | 80 °C |
| Type of protection | IP20 |
| Lifetime | up to 100,000 h |
| Guarantee | 5 Year(s) |
| Dimensions L x W x H | 97 x 43 x 30 mm |
- (1) Valid at 100 % dimming level.
- (2) Depending on the selected output current.
- (3) Depending on the DALI traffic at the interface.
- (4) Valid for immediate change of power supply type otherwise the starting time is valid.
- (5) Output current is mean value.
- (6) L-N acc. to EN 61000-4-5. 2 Ohm, 1.2/50 µs, 8/20 µs.
- (7) Also applies to corridorFUNCTION.
| Specific technical data | ||||||
|---|---|---|---|---|---|---|
| Type | Output current (1) | Min. output voltage | Max. output voltage | Max. output power | Typ. power consumption (at 230 V, 50 Hz, full load) | Typ. current consumption (at 230 V, 50 Hz, full load) |
| LC 28/300-700/42 o4a NF SC EXC3 | 300 mA | 7.5 V | 42 V | 12.6 W | 15.0 W | 65 mA |
| LC 28/300-700/42 o4a NF SC EXC3 | 400 mA | 7.5 V | 42 V | 16.8 W | 19.5 W | 85 mA |
| LC 28/300-700/42 o4a NF SC EXC3 | 500 mA | 7.5 V | 42 V | 21.0 W | 24.2 W | 105 mA |
| LC 28/300-700/42 o4a NF SC EXC3 | 600 mA | 7.5 V | 42 V | 25.2 W | 29.4 W | 133 mA |
| LC 28/300-700/42 o4a NF SC EXC3 | 700 mA | 7.5 V | 40 V | 28.0 W | 32.0 W | 153 mA |
| Certificates / declarations of conformity | ||
| Type | Article number | Certificates |
|---|---|---|
| Certificates () | ||
Strain-relief set 43x30mm Accessories
- Approval marks:
-
-
-
-
ACU SC 30x43x30mm CLIP-ON SR SET (28001168, non-pre-assembled)
-
ACU SC 30x43x30mm CLIP-ON SR SET 300 (28001351, non-pre-assembled, 300 pcs. packaging)
-
ACU SC 30x43x30mm CLIP-ON SR PA (28001699, pre-assembled)
-
ACU SC 15x43x30mm CLIP-ON SR PA (28001574, pre-assembled)
Product description
- Optional strain-relief set for independent applications
- Transforms the LED driver into a fully class II compatible LED driver (e.g. ceiling installation)
- Easy and tool-free mounting to the LED driver, screwless cable-clamp channels for long strain-relief (30 x 43 x 30 mm)
- With screws for short strain-relief (15 x 34 x 30 mm)
- Overall length = length L (LED driver) + 2 x 30 mm (long strain-relief set), 2 x 15 mm ( short strain-relief) or long and short strain-relief any combination
- Standard SC (L = 30 mm) available as non-pre-assembled and pre-assembled
- Short SC (L = 15 mm) only pre-assembled available
| Ordering data | ||||
|---|---|---|---|---|
| Type | Article number | Packaging, carton (1) | Packaging, outer box | Weight per pc. |
| ACU SC 43x30mm CLIP-ON SR SET | 28001168 | 10 pc(s). | 500 pc(s). | 0.038 kg |
| ACU SC 43x30mm CLIP-ON SR SET 300 | 28001351 | 300 pc(s). | 300 pc(s). | 0.038 kg |
| ACU SC 30x43x30mm CLIP-ON SR PA | 28001699 | 10 pc(s). | 500 pc(s). | 0.021 kg |
| ACU SC 15x43x30mm CLIP-ON SR PA | 28001574 | 10 pc(s). | 1,200 pc(s). | 0.010 kg |
| CAD / RAY | ||
|---|---|---|
| Type | Article number | CAD Files |
| ACU SC 43x30mm CLIP-ON SR SET | 28001168 | CAD (3.7 MB) |
| ACU SC 43x30mm CLIP-ON SR SET 300 | 28001351 | CAD (3.7 MB) |
| ACU SC 30x43x30mm CLIP-ON SR PA | 28001699 | CAD (3.7 MB) |
| ACU SC 15x43x30mm CLIP-ON SR PA | 28001574 | CAD (3.2 MB) |
| CAD / RAY | ||
|---|---|---|
| Type | Article number | CAD Files |
| LC 28/300-700/42 o4a NF SC EXC3 | 28004042 | CAD (2.0 MB) |
| EPD | ||
|---|---|---|
| Type | Article number | Environmental Product Declaration (EPD) |
| LC 28/300-700/42 o4a NF SC EXC3 | 28004042 | EPD |