Driver LC 50W 1200mA fixC SC SNC2

essence series

Product description

  • Fixed output LED driver
  • Can be either used built-in or independent with clip-on strain-relief (see accessory)
  • Independent LED driver with cable clamps
  • Constant current LED driver
  • For luminaires of protection class I and protection class II
  • Temperature protection as per EN 61347-2-13 C5e
  • Output current 1,200 mA
  • Nominal lifetime up to 50,000 h
  • 5 years guarantee

Housing properties

  • Casing: polycarbonate, white
  • Type of protection IP20

Functions

  • Overload protection
  • Short-circuit protection
  • No-load protection
  • Burst protection voltage 1 kV
  • Surge protection voltage 1 kV (L to N)
  • Surge protection voltage 2 kV (L/N to earth)

Typical applications

  • For spot light and downlight in retail and hospitality applications
  • For panel light and area light in office and education application
Autoscroll for tables
Ordering data
Type Article number Pack­ag­ing, carton Pack­ag­ing, low volume Pack­ag­ing, high volume Weight per pc.
LC 50/1200/42 fixC SC SNC2 87500766 15 pc(s). 450 pc(s). 3,600 pc(s). 0.108 kg
Luminaire types:
Recessed floor & wallmounted luminaires
Free-standing luminaires
High bay luminaires
Linear luminaires
Spotlights
Wide-area luminaires (in-built, remote, pendant)
Approval marks:
IP20
SELV
110
Short Circuit Proof
BIS
KC
CCC
RCM
EAC
CE
UKCA
ENEC
RoHs
Technical data
Rated supply voltage 220 – 240 V
AC voltage range 198 – 264 V
Mains frequency 50 / 60 Hz
Overvoltage protection 320 V AC, 1 h
THD (at 230 V, 50 Hz, full load) < 20 %
Output current tolerance (1) ± 7.5 %
Typical output LF current ripple at full load (2) ± 25 %
Starting time (at 230 V, 50 Hz, full load) ≤ 0.5 s
Turn off time (at 230 V, 50 Hz, full load) ≤ 0.5 s
Hold on time at power failure (output) 0 s
Ambient temperature ta -20 ... +50 °C
Ambient temperature ta (at lifetime 50,000 h) 40 °C
Storage temperature ts -40 ... +80 °C
Lifetime up to 50,000 h
Guarantee 5 Year(s)
Dimensions L x W x H 115 x 43 x 30 mm
Autoscroll for tables
Specific technical data
Type Output current (1) Input current (at 230 V, 50 Hz, full load) Max. input power Typ. power con­sump­tion (at 230 V, 50 Hz, full load) Output power range λ at full load (2) Ef­fi­cien­cy at full load (2) λ over full operating range (min.) (2) Ef­fi­cien­cy at min. load (2) Min. forward voltage Max. for­ward volt­age Max. output voltage (U-OUT) Max. peak output current (3) Max. casing temperature tc
LC 50/1200/42 fixC SC SNC2 1,200 mA 260 mA 55.5 W 55 W 31.2 – 50.4 W 0.95 91 % 0.9C 90 % 26 V 42 V 60 V 1,590 mA 85 °C
Document      Size       Date       
 
Driver_LC_50W_1200mA_fixC_SC_SNC2_en.pdf
Data sheet 		1.69 MB 21/06/2022
Leaflet_Driver_EN_web.pdf
Leaflet – LED drivers 		2.7 MB 26/04/2022
Certificates / declarations of conformity
Type      Article number      Certificates     
Certificates ()

Certificates for ()

Document      Country      Size      Date of issue     
new

Strain-relief set 43x30mm Accessories

Approval marks:
MM
Independent gear
SC2 - Protection Class 2
  • ACU SC 30x43x30mm CLIP-ON SR SET (28001168, non-pre-assembled)

    ACU SC 30x43x30mm CLIP-ON SR SET (28001168, non-pre-assembled)

  • ACU SC 30x43x30mm CLIP-ON SR SET 300 (28001351, non-pre-assembled, 300 pcs. packaging)

    ACU SC 30x43x30mm CLIP-ON SR SET 300 (28001351, non-pre-assembled, 300 pcs. packaging)

  • ACU SC 30x43x30mm CLIP-ON SR PA (28001699, pre-assembled)

    ACU SC 30x43x30mm CLIP-ON SR PA (28001699, pre-assembled)

  • ACU SC 15x43x30mm CLIP-ON SR PA (28001574, pre-assembled)

    ACU SC 15x43x30mm CLIP-ON SR PA (28001574, pre-assembled)

Product description

  • Optional strain-relief set for independent applications
  • Transforms the LED driver into a fully class II compatible LED driver (e.g. ceiling installation)
  • Easy and tool-free mounting to the LED driver, screwless cable-clamp channels for long strain-relief (30 x 43 x 30 mm)
  • With screws for short strain-relief (15 x 34 x 30 mm)
  • Overall length = length L (LED driver) + 2 x 30 mm (long strain-relief set), 2 x 15 mm ( short strain-relief) or long and short strain-relief any combination
  • Standard SC (L = 30 mm) available as non-pre-assembled and pre-assembled
  • Short SC (L = 15 mm) only pre-assembled available
Ordering data
Type Article number Pack­ag­ing, carton (1) Pack­ag­ing, outer box Weight per pc.
ACU SC 43x30mm CLIP-ON SR SET 28001168 10 pc(s). 500 pc(s). 0.038 kg
ACU SC 43x30mm CLIP-ON SR SET 300 28001351 300 pc(s). 300 pc(s). 0.038 kg
ACU SC 30x43x30mm CLIP-ON SR PA 28001699 10 pc(s). 500 pc(s). 0.021 kg
ACU SC 15x43x30mm CLIP-ON SR PA 28001574 10 pc(s). 1,200 pc(s). 0.010 kg
CAD / RAY
Type Article number CAD Files
ACU SC 43x30mm CLIP-ON SR SET 28001168 CAD (3.7 MB)
ACU SC 43x30mm CLIP-ON SR SET 300 28001351 CAD (3.7 MB)
ACU SC 30x43x30mm CLIP-ON SR PA 28001699 CAD (3.7 MB)
ACU SC 15x43x30mm CLIP-ON SR PA 28001574 CAD (3.2 MB)
Autoscroll for tables
EPD
Type Article number Environmental Product Declaration (EPD)
LC 50/1200/42 fixC SC SNC2 87500766 EPD
 
 
Visiting from the US or Canada?
Go to our dedicated site.
http://www.tridonic.us or stay on tridonic.com