Driver LC 57W 800-1050mA flexC lp ADV

advanced series

Product description

  • LED Constant current LED driver for luminaire installation
  • New version DC operating with EL marking
  • For luminaires of protection class I and protection class II
  • Temperature protection as per EN 61347-2-13 C5e
  • Output current adjustable between 800 – 1,050 mA
  • Max. output power 57 W
  • Up to 86 % efficiency
  • Nominal lifetime up to 100,000 h
  • 5 years guarantee

Housing properties

  • Low profile metal casing with white cover
  • Type of protection IP20

Interfaces

  • Terminal blocks: 45° push terminals

Functions

  • Overload protection
  • Short-circuit protection
  • No-load protection
  • Overtemperature protection
  • Burst protection voltage 1 kV
  • Surge protection voltage 1 kV (L to N)
  • Surge protection voltage 2 kV (L/N to earth)
  • Suitable for emergency escape lighting systems acc. to IEC 50172

Typical applications

  • For linear/area lighting in office applications
Autoscroll for tables
Ordering data
Type Article number Pack­ag­ing, carton Pack­ag­ing, pallet Weight per pc.
LC 57W 800-1050mA flexC lp ADV 28002474 50 pc(s). 900 pc(s). 0.191 kg
Luminaire types:
Recessed floor & wallmounted luminaires
Free-standing luminaires
Linear luminaires
Wide-area luminaires (in-built, remote, pendant)
Approval marks:
IP20
SELV
Short Circuit Proof
110
Emergency Lighting suitable
EAC
CCC
RCM
CE
ENEC
RoHs
Technical data
Rated supply voltage 220 – 240 V
AC voltage range 198 – 264 V
DC voltage range 176 – 280 V
Max. input current (at 230 V, 50 Hz, full load) 0.32 A
Typ. input current (at 230 V, 0 Hz, full load) 0.283 A
Leakage current (at 230 V, 50 Hz, full load) < 400 µA
Mains frequency 0 / 50 / 60 Hz
Overvoltage protection 320 V AC, 1 h
Max. input power (1) 71 W
Typ. power consumption (at 230 V, 50 Hz, full load) (1) 64.5 W
Min. output power 16 W
Max. output power 57 W
Typ. efficiency (at 230 V, 50 Hz, full load) (1) 86 %
λ (at 230 V, 50 Hz, full load) (1) 0.95
Output current tolerance (2) (3) ± 7.5 %
Max. output current peak (4) ≤ output current + 20 %
Max. output voltage (U-OUT) 60 V
THD (at 230 V, 50 Hz, full load) < 8 %
Typ. current ripple (at 230 V, 50 Hz, full load) ± 5 %
Output P_ST_LM (at full load) ≤ 1
Output SVM (at full load) ≤ 0.4
Starting time (at 230 V, 50 Hz, full load) < 500 ms
Starting time (DC mode) < 500 ms
Switchover time (AC/DC) (5) < 500 ms
Turn off time (at 230 V, 50 Hz, full load) ≤ 0.5 s
Hold on time at power failure (output) 0 s
Ambient temperature ta (at lifetime 100,000 h) 45 °C
Storage temperature ts -40 ... +80 °C
Lifetime up to 100,000 h
Guarantee 5 Year(s)
Dimensions L x W x H 280 x 30 x 21 mm
Hole spacing D 268 mm
Autoscroll for tables
Specific technical data
Type Output current (1) Min. output voltage Max. output voltage Max. output power Typ. power con­sump­tion (at 230 V, 50 Hz, full load) Typ. current consumption (at 230 V, 50 Hz, full load) tc point max. Ambient temperature ta Iout select Resistor (2)
LC 57W 800-1050mA flexC lp ADV 800 mA 20 V 54 V 43.2 W 50.5 W 225 mA 85 °C -20 ... +55 °C 0-1 ADV Type A
LC 57W 800-1050mA flexC lp ADV 850 mA 20 V 54 V 45.9 W 52.5 W 234 mA 85 °C -20 ... +55 °C 0-1 ADV Type D
LC 57W 800-1050mA flexC lp ADV 900 mA 20 V 54 V 48.6 W 56.0 W 250 mA 85 °C -20 ... +55 °C 0-2 ADV Type A
LC 57W 800-1050mA flexC lp ADV 950 mA 20 V 54 V 51.3 W 58.5 W 260 mA 85 °C -20 ... +55 °C 0-2 ADV Type D
LC 57W 800-1050mA flexC lp ADV 1,050 mA 20 V 54 V 57.0 W 64.5 W 285 mA 90 °C -20 ... +55 °C
Document      Size       Date       
 
Driver_LC_57W_800-1050mA_flexC_lp_ADV_en.pdf
Data sheet
1.39 MB 12/04/2022
Leaflet_Driver_EN_web.pdf
Leaflet – LED drivers
2.7 MB 26/04/2022
Certificates / declarations of conformity
Type      Article number      Certificates     
Certificates ()

ADV Plug for output current select Accessories

Product description

  • Ready-for-use resistor to set output current value
  • Compatible with LED driver serie LC flexC ADV; not compatible with I-SELECT (generation 1) and I-SELECT 2 (generation 2)
  • Resistor is base insulated
  • When using your own resistors, make sure the resistor must be isolated
  • Resistor power 0.25 W
  • Current tolerance ± 2 % additional to output current tolerance
  • Hot plug of the resistor is not permitted
  • For detailed current setting see table “Specific technical data” of the respective LED driver and chapter 3.7 or 3.8 Current setting in data sheet
Ordering data
Type Article number Colour of X area Colour of Y area Marking Resistor value Pack­ag­ing, bag Weight per pc.
ADV Plug Type A YL 28001771 Yellow Yellow A 0.00 kΩ 10 pc(s). 0.001 kg
ADV Plug Type D YL 28001774 Yellow White D 54.90 kΩ 10 pc(s). 0.001 kg
Autoscroll for tables
CAD / RAY
Type Article number CAD Files
LC 57W 800-1050mA flexC lp ADV 28002474 CAD (1.5 MB)
EPD
Type Article number Environmental Product Declaration (EPD)
LC 57W 800-1050mA flexC lp ADV 28002474 EPD
 
 
Visiting from the US or Canada?
Go to our dedicated site.
http://www.tridonic.us or stay on tridonic.com