- Tridonic
- Products
- LED drivers
- LED modules
- Tunable White
- Emergency Lighting
- Overview
- Filter
- EM converterLED
- EM BASIC
- EM converterLED BASIC NiCd 50 V Kit
- EM converterLED BASIC NiCd/NiMH 50 V
- EM converterLED BASIC G2 LiFePO4 50 V Kit
- EM converterLED BASIC MH/LiFePO4 50 V
- EM converterLED BASIC HP 6/9 W 50 V
- EM converterLED ONC 50 V 1 h Kit
- EM converterLED ONC 50 V 3 h Kit
- EM converterLED BASIC NiCd/NiMH 90 V
- EM converterLED BASIC MH/LiFePO4 90 V
- EM converterLED BASIC NiCd 250 V Kit
- EM converterLED BASIC NiCd/NiMH 250 V
- EM converterLED BASIC MH/LiFePO4 250 V
- EM converterLED BASIC HP 6/9 W 250 V
- EM converterLED ONC 250 V 1 h Kit
- EM converterLED ONC 250 V 3 h Kit
- EM SELFTEST
- EM SELFTEST (US applications)
- EM PRO
- EM PRO NFC (Powered DALI)
- EM BASIC
- EM converterPACK
- EM powerLED
- EM LED Light Engines
- EM Controls
- EM Batteries
- Controls and Connectivity
- Applications
- Connected lighting
- Projects
- Services
- Technical data
- Contact
- Home
- Products
- ►
- Emergency Lighting
- ►
- EM converterLED
- ►
- EM BASIC
- ►
- EM converterLED BASIC HP 6/9 W 50 V
EM converterLED BASIC HP 6/9 W 50 V
BASIC version
-
-
Note: Supply of control gear with duration link in 3 hours position. Remove duration link for duration of 1 h. Duration link must be set before battery and mains connection.
Product description
- Self contained emergency lighting LED driver for manual testing
- For LED modules with a forward voltage of 15 – 54 V
- SELV for output voltage < 60 V DC
- Low profile casing (21 x 30 mm cross-section)
- For luminaire installation
- EM = Emergency
- Nominal lifetime up to 100,000 h
- 5 years guarantee
Properties
- Non maintained operation
- 1 or 3 h rated duration
- Operating time selectable with plug (duration link)
- Compatible with all dimmable and non-dimmable constant current LED driver (see data sheet, LED driver compatibility)
- 3-pole technology: 2-pole LED module changeover and delayed power switching for the LED driver
- Automatic shutdown of output if LED load is out of range
- Constant power output
- Maximum light output for all LED modules
- Electronic charge system
- Deep discharge protection
- Short-circuit-proof battery connection
- Polarity reversal protection for battery provided by 3-pole connector
Batteries
- LiFePO4 batteries with Tridonic LiFeGuard
- High-temperature cells
- 26650 cells
- 4 year design life
- 3 years guarantee
- For battery compatibility refer to data sheet, battery selection
| Ordering data | ||||||
|---|---|---|---|---|---|---|
| Type | Article number | Rated duration | Packaging, carton | Packaging, pallet | Weight per pc. | Dimensions L x W x H |
| EMcLED BASIC HP 6W 50V | 89800828 | 1/3 h | 10 pc(s). | 1,600 pc(s). | 0.07 kg | 179 x 30 x 21 mm |
| EMcLED BASIC HP 9W 50V | 89800830 | 1/3 h | 10 pc(s). | 1,600 pc(s). | 0.07 kg | 179 x 30 x 21 mm |
- Approval marks:
-
-
-
-
-
-
-
-
-
-
| Technical data | |
|---|---|
| Rated supply voltage | 220 – 240 V |
| AC voltage range | 198 – 264 V |
| Mains frequency | 50 / 60 Hz |
| Typ. λ (at 230 V, 50 Hz) | 0.6C |
| Forward voltage range LED module | 15 – 54 V |
| Output current | Refer to data sheet |
| Starting time | < 0.5 s from detection of emergency event |
| Overvoltage protection | 320 V (for 48 h) |
| U-OUT (including open- / short-circuit and double load) | 60 V |
| Max. open circuit voltage | 60 V |
| Battery charging time (1) | 24 h |
| Ambient temperature ta | -25 ... +55 °C |
| Max. casing temperature tc | 80 °C |
| Mains voltage changeover threshold | According to EN 60598-2-22 |
| Mains surge capability (between L - N) | 1 kV |
| Mains surge capability (between L/N - PE) | 2 kV |
| Type of protection | IP20 |
| Lifetime | up to 100,000 h |
| Guarantee | 5 Year(s) |
| Dimensions L x W x H | 179 x 30 x 21 mm |
| Specific technical data | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Type | Battery technology | Rated duration | Typ. λ (at 230 V, 50 Hz) | Typ. output power P emergency | Mains current in charging operation | Mains power in charging operation | ||||
| Initial charge | Fast recharge | Trickle charge (1) | Initial charge | Fast recharge | Trickle charge (1) | |||||
| EMcLED BASIC HP 6W 50V | LiFePO4 | 1 h | 0.65C | 6 W | 32 mA | 32 mA | 32 / 12 mA | 4.8 W | 4.8 W | 4.8 / 1.4 W |
| EMcLED BASIC HP 6W 50V | LiFePO4 | 3 h | 0.65C | 6 W | 32 mA | 32 mA | 32 / 12 mA | 4.8 W | 4.8 W | 4.8 / 1.4 W |
| EMcLED BASIC HP 9W 50V | LiFePO4 | 1 h | 0.70C | 9 W | 32 mA | 32 mA | 32 / 12 mA | 4.8 W | 4.8 W | 4.8 / 1.4 W |
| EMcLED BASIC HP 9W 50V | LiFePO4 | 3 h | 0.70C | 9 W | 40 mA | 40 mA | 40 / 12 mA | 6.2 W | 6.2 W | 6.2 / 1.4 W |
| Certificates / declarations of conformity | ||
| Type | Article number | Certificates |
|---|---|---|
| Certificates () | ||
EMcLED Strain-relief set 240x43x30mm Accessories
- Approval marks:
-
-
Product description
- Optional strain-relief set for independent applications
- Transforms the LED driver into a fully class II compatible LED driver (e.g. ceiling installation)
- Easy and tool-free mounting to the LED driver, screwless cable-clamp channels with strain-relief (240 x 43 x 30 mm)
| Ordering data | |||
|---|---|---|---|
| Type | Article number | Packaging, carton | Weight per pc. |
| EM cLED SR | 28003813 | 10 pc(s). | 0.08 kg |
Test switch EM3 Accessories
- Approval marks:
-
Product description
- For connection to the emergency lighting unit
- For checking the device function
- Plug connection
- Dielectric strength: 1,500 V AC for 60 seconds
| Ordering data | ||||
|---|---|---|---|---|
| Type | Article number | Packaging, bag | Packaging, carton | Weight per pc. |
| Test switch EM 3 | 89899956 | 25 pc(s). | 200 pc(s). | 0.01 kg |
| CAD / RAY | ||
|---|---|---|
| Type | Article number | CAD Files |
| Test switch EM 3 | 89899956 | CAD (1.1 MB) |
Status indication green LED EM CON Accessories
Product description
- A green LED indicates that charging current is flowing into the battery
- 0.3 / 1.0 m cable length
- Plug connection
| Ordering data | |||||
|---|---|---|---|---|---|
| Type | Type | Article number | Packaging, bag | Packaging, carton | Weight per pc. |
| LED EM | green, 1.0 m CON | 89800269 | 25 pc(s). | 200 pc(s). | 0.015 kg |
| LED EM | green, HO 1.0 m CON | 89800271 | 25 pc(s). | 200 pc(s). | 0.015 kg |
| LED EM | green, 0.6 m CON | 89800472 | 25 pc(s). | 200 pc(s). | 0.009 kg |
| LED EM | green, HO 0.6 m CON | 89800473 | 25 pc(s). | 200 pc(s). | 0.009 kg |
| LED EM | green, 0.3 m CON | 89800270 | 25 pc(s). | 200 pc(s). | 0.005 kg |
| LED EM | green, HO 0.3 m CON | 89800272 | 25 pc(s). | 200 pc(s). | 0.005 kg |
| CAD / RAY | ||
|---|---|---|
| Type | Article number | CAD Files |
| LED EM | 89800269 | CAD (799.4 KB) |
| LED EM | 89800271 | CAD (799.4 KB) |
| LED EM | 89800472 | CAD (799.4 KB) |
| LED EM | 89800473 | CAD (799.4 KB) |
| LED EM | 89800270 | CAD (799.4 KB) |
| LED EM | 89800272 | CAD (799.4 KB) |
Connection cable LiFePO4 Accessories
Product description
- Extension cable for LiFePO4 batteries
- Cable length 500 mm
- 3-pole plug connection
| Ordering data | ||||
|---|---|---|---|---|
| Type | Article number | Packaging, bag | Packaging, carton | Weight per pc. |
| EXTENSION CABLE LiFePO4 500mm | 28002461 | 10 pc(s). | 200 pc(s). | 0.01 kg |