EM powerLED SELFTEST FX LiFePO4 1 – 2 W

Combined emergency lighting LED driver 1 – 4 W

  • Screw-fix

    Screw-fix

  • Clip-fix

    Clip-fix

Product description

  • Emergency lighting LED driver with selftest function
  • For self-contained emergency lighting
  • SELV for output voltage < 60 V DC
  • Low profile casing (21 x 30 mm cross-section)
  • EM = Emergency
  • 5 years guarantee

Properties

  • Mains and emergency operation
  • Self-test as per IEC 62034
  • Constant current mode
  • With either screw or clip fastening (clip-fix)
  • 1, 2 or 3 h rated duration
  • Selectable operating time (jumper)
  • Two-colour status display LED
  • “Rest mode” function
  • SELV classified (outputs powerLED, battery, status LED, test switch)
  • Very low energy consumption from the battery after activation of the deep discharge protection

Battery management

  • Intelligent charge system
  • Deep discharge protection
  • Temperature protection
  • Reverse polarity protection

Batteries

  • LiFePO4 batteries with Tridonic LiFeGuard
  • Overcharge-/Overdischarge protection
  • Ensures safety in use
  • Up to 8 year design life
  • 4 years guarantee
Autoscroll for tables
Ordering data
Type Article number Dimensions
L x W x H		 Max. number of LEDs Packaging, carton Packaging, pallet Weight per pc.
Screw fastening version
EM pLED ST FX 201 LiFePO4 1W SCREW 89800798 139 x 30 x 21 mm 1 25 pc(s). 1,200 pc(s). –
EM pLED ST FX 202 LiFePO4 2W SCREW 89800800 139 x 30 x 21 mm 2 25 pc(s). 1,200 pc(s). 0.054 kg
Clip fastening version
EM pLED ST FX 201 LiFePO4 1W CLIP 89800797 127 x 30 x 21 mm 1 25 pc(s). 1,200 pc(s). –
EM pLED ST FX 202 LiFePO4 2W CLIP 89800799 127 x 30 x 21 mm 2 25 pc(s). 1,200 pc(s). –
Approval marks:
IP20
SELV
BSI
Short Circuit Proof
110
EL-T
doppelte Isolierung
EAC
CE
UKCA
ENEC
RoHs
Technical data
Rated supply voltage 220 – 240 V
AC voltage range 198 – 264 V
Mains frequency 50 / 60 Hz
THD (at 230 V, 50 Hz, full load) < 120 %
U-OUT (including open- / short-circuit and double load) 15 V
Max. open circuit voltage 15 V
Output current tolerance ± 10 %
Typical output LF current ripple at full load ± 5 %
Starting time < 0.7 s
Output current Refer to data sheet
Overvoltage protection 320 V (for 48 h)
Max. casing temperature tc 75 °C
Ambient temperature ta -25 ... +55 °C
Mains voltage changeover threshold According to EN 60598-2-22
Mains surge capability (between L - N) 1 kV
Surge voltage at output side (against PE) < 2 kV
Mains surge capability (between L/N - PE) 2 kV
Type of protection IP20
Lifetime up to 100,000 h
Guarantee 5 Year(s)
Autoscroll for tables
Specific technical data
Type Rated duration Number of LEDs Typ. λ (at 230 V, 50 Hz) Forward voltage range LED module (1) (2) Non-maintained operation Maintained operation
Mains current in charging operation (3) Mains power in charging operation (3) Mains current in charging operation (3) Mains power in charging operation (3)
EM pLED ST FX 201 LiFePO4 1W SCREW 1 h 1 0.55C 2.6 – 3.4 V 16 / 11 mA 1.5 / 0.9 W 27 / 23 mA 3.5 / 2.8 W
EM pLED ST FX 201 LiFePO4 1W SCREW 2 h 1 0.55C 2.6 – 3.4 V 16 / 11 mA 1.5 / 0.9 W 27 / 23 mA 3.5 / 2.8 W
EM pLED ST FX 201 LiFePO4 1W SCREW 3 h 1 0.55C 2.6 – 3.4 V 21 / 11 mA 2.1 / 0.9 W 31 / 23 mA 4.0 / 2.8 W
EM pLED ST FX 202 LiFePO4 2W CLIP 1 h 1 0.58C 2.6 – 3.4 V 16 / 11 mA 1.5 / 0.9 W 27 / 23 mA 3.5 / 2.8 W
EM pLED ST FX 202 LiFePO4 2W CLIP 1 h 2 0.58C 5.2 – 6.8 V 16 / 11 mA 1.5 / 0.9 W 37 / 33 mA 5.0 / 4.1 W
EM pLED ST FX 202 LiFePO4 2W CLIP 2 h 1 0.58C 2.6 – 3.4 V 20 / 11 mA 2.2 / 0.9 W 31 / 23 mA 4.0 / 2.8 W
EM pLED ST FX 202 LiFePO4 2W CLIP 2 h 2 0.58C 5.2 – 6.8 V 20 / 11 mA 2.2 / 0.9 W 42 / 33 mA 5.5 / 4.1 W
EM pLED ST FX 202 LiFePO4 2W CLIP 3 h 1 0.58C 2.6 – 3.4 V 22 / 11 mA 2.5 / 0.9 W 33 / 23 mA 4.5 / 2.8 W
EM pLED ST FX 202 LiFePO4 2W CLIP 3 h 2 0.58C 5.2 – 6.8 V 22 / 11 mA 2.5 / 0.9 W 44 / 33 mA 5.8 / 4.1 W
EM pLED ST FX 202 LiFePO4 2W SCREW 1 h 1 0.58C 2.6 – 3.4 V 16 / 11 mA 1.5 / 0.9 W 27 / 23 mA 3.5 / 2.8 W
EM pLED ST FX 202 LiFePO4 2W SCREW 1 h 2 0.58C 5.2 – 6.8 V 16 / 11 mA 1.5 / 0.9 W 37 / 33 mA 5.0 / 4.1 W
EM pLED ST FX 202 LiFePO4 2W SCREW 2 h 1 0.58C 2.6 – 3.4 V 20 / 11 mA 2.2 / 0.9 W 31 / 23 mA 4.0 / 2.8 W
EM pLED ST FX 202 LiFePO4 2W SCREW 2 h 2 0.58C 5.2 – 6.8 V 20 / 11 mA 2.2 / 0.9 W 42 / 33 mA 5.5 / 4.1 W
EM pLED ST FX 202 LiFePO4 2W SCREW 3 h 1 0.58C 2.6 – 3.4 V 22 / 11 mA 2.5 / 0.9 W 33 / 23 mA 4.5 / 2.8 W
EM pLED ST FX 202 LiFePO4 2W SCREW 3 h 2 0.58C 5.2 – 6.8 V 22 / 11 mA 2.5 / 0.9 W 44 / 33 mA 5.8 / 4.1 W
EM pLED ST FX 201 LiFePO4 1W CLIP 1 h 1 0.55C 2.6 – 3.4 V 16 / 11 mA 1.5 / 0.9 W 27 / 23 mA 3.5 / 2.8 W
EM pLED ST FX 201 LiFePO4 1W CLIP 2 h 1 0.55C 2.6 – 3.4 V 16 / 11 mA 1.5 / 0.9 W 27 / 23 mA 3.5 / 2.8 W
EM pLED ST FX 201 LiFePO4 1W CLIP 3 h 1 0.55C 2.6 – 3.4 V 21 / 11 mA 2.1 / 0.9 W 31 / 23 mA 4.0 / 2.8 W
Document Size Date  
 
EM_powerLED_SELFTEST_FX_LiFePO4_1-2W_en.pdf
Data sheet 		2 MB 24/10/2023
Functional_Description_SELFTEST_Emergency_Devices_en.pdf
Functional Description SELFTEST Emergency Devices 		677 KB 25/11/2020
EM_smart_booklet_EN.pdf
Smart booklet – Emergency
Let emergencies be our problem 		5.38 MB 22/05/2023
Certificates / declarations of conformity
Type      Article number      Certificates     
Certificates ()

Certificates for ()

Document      Country      Size      Date of issue     
new

Test switch EM2 Accessories

Approval marks:
RoHs

Product description

  • For connection to the emergency lighting unit
  • For checking the device function
  • Dielectric strength: 1,500 V AC for 60 seconds
Ordering data
Type Article number Packaging, bag Packaging, carton Weight per pc.
Test switch EM 2 89805277 25 pc(s). 600 pc(s). 0.009 kg
CAD / RAY
Type Article number CAD Files
Test switch EM 2 89805277 CAD (1009.0 KB)

Status indication bi-colour LED EM Accessories

Approval marks:
RoHs

Product description

  • Two-colour status display LED
  • Green: system OK, red: fault
Ordering data
Type Type Article number Packaging, bag Packaging, carton Weight per pc.
LED EM bi-colour 89899720 25 pc(s). 200 pc(s). 0.017 kg
LED EM bi-colour, high brightness 89899753 25 pc(s). 200 pc(s). 0.013 kg
CAD / RAY
Type Article number CAD Files
LED EM 89899720 CAD (579.9 KB)
LED EM 89899753 CAD (579.9 KB)

Connection cable LiFePO4 Accessories

Product description

  • Extension cable for LiFePO4 batteries
  • Cable length 500 mm
  • 3-pole plug connection
Ordering data
Type Article number Packaging, bag Packaging, carton Weight per pc.
EXTENSION CABLE LiFePO4 500mm 28002461 10 pc(s). 200 pc(s). 0.01 kg

EMpLED Strain-relief set 200x43x25.5mm Accessories

Approval marks:
Independent gear
SC2 - Protection Class 2

Product description

  • Optional strain-relief set for independent applications
  • Transforms the LED driver into a fully class II compatible LED driver (e.g. ceiling installation)
  • Easy and tool-free mounting to the LED driver, screwless cable-clamp channels with strain-relief (200 x 43 x 25.5 mm)
Autoscroll for tables
EPD
Type Article number Environmental Product Declaration (EPD)
EM pLED ST FX 201 LiFePO4 1W SCREW 89800798 EPD
EM pLED ST FX 202 LiFePO4 2W SCREW 89800800 EPD
EM pLED ST FX 201 LiFePO4 1W CLIP 89800797 EPD
EM pLED ST FX 202 LiFePO4 2W CLIP 89800799 EPD
 
 
Visiting from the US or Canada?
Go to our dedicated site.
http://www.tridonic.us or stay on tridonic.com