Driver LC 38W 900mA fixC SC ADV2

advanced series

Product description

  • Fixed output LED driver
  • Can be either used built-in or independent with clip-on strain-relief (see accessory)
  • Independent LED driver with cable clamps
  • For luminaires of protection class I and protection class II
  • Temperature protection as per EN 61347-2-13 C5e
  • Constant current LED driver
  • Output current 900 mA
  • Max. output power 37.8 W
  • Nominal lifetime up to 50,000 h
  • 5 years guarantee

Housing properties

  • Casing: polycarbonate, white
  • Type of protection IP20

Functions

  • Overload protection
  • Short-circuit protection
  • No-load protection

Typical applications

  • For spot light and downlight in retail and hospitality applications
  • For panel light and area light in office and education application
Autoscroll for tables
Ordering data
Type Article number Pack­ag­ing, carton Pack­ag­ing, low volume Pack­ag­ing, high volume Weight per pc.
LC 38/900/42 fixC SC ADV2 87500894 40 pc(s). 880 pc(s). 4,400 pc(s). 0.099 kg
Luminaire types:
Downlights
High bay luminaires
Linear luminaires
Wide-area luminaires (in-built, remote, pendant)
Approval marks:
IP20
SELV
110
doppelte Isolierung
Short Circuit Proof
KC
CCC
EAC
RCM
CE
UKCA
ENEC
RoHs
Technical data
Rated supply voltage 220 – 240 V
AC voltage range 198 – 264 V
Mains frequency 50 / 60 Hz
Overvoltage protection 320 V AC, 1 h
THD (at 230 V, 50 Hz, full load) ≤ 15 %
Output current tolerance (1) ± 7.5 %
Typical output LF current ripple at full load (2) ± 5 %
Output P_ST_LM (at full load) ≤ 1
Output SVM (at full load) ≤ 0.4
Starting time (at 230 V, 50 Hz, full load) ≤ 0.5 s
Turn off time (at 230 V, 50 Hz, full load) ≤ 0.5 s
Hold on time at power failure (output) 0 s
Ambient temperature ta -20 ... +50 °C
Ambient temperature ta (at lifetime 50,000 h) 50 °C
Storage temperature ts -40 ... +80 °C
Mains burst capability 2 kV
Mains surge capability (between L - N) 1 kV
Mains surge capability (between L/N - PE) 2 kV
Surge voltage at output side (against PE) 3 kV
Lifetime up to 50,000 h
Guarantee 5 Year(s)
Dimensions L x W x H 97 x 43 x 30 mm
Autoscroll for tables
Specific technical data
Type Output current (1) Input current (at 230 V, 50 Hz, full load) Max. input power Typ. power con­sump­tion (at 230 V, 50 Hz, full load) Output power range λ at full load (2) Ef­fi­cien­cy at full load λ over full operating range (min.) (2) Ef­fi­cien­cy at min. load Min. forward voltage Max. for­ward volt­age Max. output voltage (U-OUT) Max. peak output current at full load Max. peak output current at min. load Max. casing temperature tc
LC 38/900/42 fixC SC ADV2 900 mA 190 mA 43 W 42 W 27 – 37.8 W 0.95 90 % 0.95 88 % 30 V 42 V 60 V 1,013 mA 1,013 mA 80 °C
Document Size Date  
 
Driver_LC_38W_900mA_fixC_SC_ADV2_en.pdf
Data sheet 		1.78 MB 10/01/2024
Leaflet_Driver_EN_web.pdf
Leaflet – LED drivers 		2.7 MB 26/04/2022
Certificates / declarations of conformity
Type      Article number      Certificates     
Certificates ()

Certificates for ()

Document      Country      Size      Date of issue     
new

Strain-relief set 43x30mm Accessories

Approval marks:
MM
Independent gear
SC2 - Protection Class 2
  • ACU SC 30x43x30mm CLIP-ON SR SET (28001168, non-pre-assembled)

    ACU SC 30x43x30mm CLIP-ON SR SET (28001168, non-pre-assembled)

  • ACU SC 30x43x30mm CLIP-ON SR SET 300 (28001351, non-pre-assembled, 300 pcs. packaging)

    ACU SC 30x43x30mm CLIP-ON SR SET 300 (28001351, non-pre-assembled, 300 pcs. packaging)

  • ACU SC 30x43x30mm CLIP-ON SR PA (28001699, pre-assembled)

    ACU SC 30x43x30mm CLIP-ON SR PA (28001699, pre-assembled)

  • ACU SC 15x43x30mm CLIP-ON SR PA (28001574, pre-assembled)

    ACU SC 15x43x30mm CLIP-ON SR PA (28001574, pre-assembled)

Product description

  • Optional strain-relief set for independent applications
  • Transforms the LED driver into a fully class II compatible LED driver (e.g. ceiling installation)
  • Easy and tool-free mounting to the LED driver, screwless cable-clamp channels for long strain-relief (30 x 43 x 30 mm)
  • With screws for short strain-relief (15 x 34 x 30 mm)
  • Overall length = length L (LED driver) + 2 x 30 mm (long strain-relief set), 2 x 15 mm ( short strain-relief) or long and short strain-relief any combination
  • Standard SC (L = 30 mm) available as non-pre-assembled and pre-assembled
  • Short SC (L = 15 mm) only pre-assembled available
Ordering data
Type Article number Pack­ag­ing, carton (1) Pack­ag­ing, outer box Weight per pc.
ACU SC 43x30mm CLIP-ON SR SET 28001168 10 pc(s). 500 pc(s). 0.038 kg
ACU SC 43x30mm CLIP-ON SR SET 300 28001351 300 pc(s). 300 pc(s). 0.038 kg
ACU SC 30x43x30mm CLIP-ON SR PA 28001699 10 pc(s). 500 pc(s). 0.021 kg
ACU SC 15x43x30mm CLIP-ON SR PA 28001574 10 pc(s). 1,200 pc(s). 0.010 kg
CAD / RAY
Type Article number CAD Files
ACU SC 43x30mm CLIP-ON SR SET 28001168 CAD (3.7 MB)
ACU SC 43x30mm CLIP-ON SR SET 300 28001351 CAD (3.7 MB)
ACU SC 30x43x30mm CLIP-ON SR PA 28001699 CAD (3.7 MB)
ACU SC 15x43x30mm CLIP-ON SR PA 28001574 CAD (3.2 MB)
Autoscroll for tables
CAD / RAY
Type Article number CAD Files
LC 38/900/42 fixC SC ADV2 87500894 CAD (758.5 KB)
EPD
Type Article number Environmental Product Declaration (EPD)
LC 38/900/42 fixC SC ADV2 87500894 EPD
 
 
Visiting from the US or Canada?
Go to our dedicated site.
http://www.tridonic.us or stay on tridonic.com