Home
Products
►
Emergency Lighting
►
EM powerLED
►
Combined emergency lighting LED driver
►
EM powerLED BASIC FX SC LiFePO4 32 W

EM powerLED BASIC FX SC LiFePO4 32 W

Combined emergency lighting LED driver

Product description

Combined emergency LED driver for manual testing
For self-contained emergency lighting
Can be either used build-in or independent with clip-on strain-relief (see accessory)
Max. output power 32 W
EM = Emergency
Nominal lifetime up to 100,000 h
5 years guarantee

Functions

Adjustable output current between 350 and 700 mA via I-SELECT 2 plugs
Protective features (overtemperature, short-circuit, overload, no-load, input voltage range)
Suitable for emergency escape lighting systems acc. to EN 50172
1 or 3 h rated duration depending on connected battery
Constant power output in emergency mode

Battery management

Intelligent charge system
Deep discharge protection
Temperature protection
Polarity reversal protection for battery provided by 3-pole connector

Batteries

LiFePO4 batteries with Tridonic LiFeGuard
Temperature-protected
Overcharge-/Overdischarge protection
Ensures safety in use
Up to 8 year design life
3 years guarantee
For battery compatibility refer to data sheet, battery selection

Order information
Common data
Technical data
Downloads
Images
Links
Certificates
Accessories
CAD/RAY
EPD

Ordering data
Type	Article number	Packaging, carton	Packaging, pallet	Weight per pc.
EM pLED BASIC FX 102 SC LiFePO4 32W 50V	89800687	10 pc(s).	1,000 pc(s).	0.115 kg

Lamp types:

Approval marks:

Technical data
Rated supply voltage	220 – 240 V
AC voltage range	198 – 264 V
Mains frequency	50 / 60 Hz
Overvoltage protection	320 V (for 48 h)
Typ. rated current (at 230 V, 50 Hz, full load, charging) (1)	185 mA
Max. input power	41 W
Typ. efficiency (at 230 V, 50 Hz, full load, charging) (1)	84 %
λ (at 230 V, 50 Hz, full load, charging)	0.95
Typ. input current in no-load operation (charging)	20 mA
Typ. input power in no-load operation (charging)	1.1 W
In-rush current (peak / duration)	4 A / 260 µs
THD (at 230 V, 50 Hz, full load)	14 %
Starting time (at 230 V, 50 Hz, full load)	< 500 ms
Turn off time (at 230 V, 50 Hz, full load)	< 50 ms
Switchover time (AC/EM)	< 500 ms
Output current tolerance	< 5 %
Max. output current peak (non-repetitive)	< 35 %
Output LF current ripple (< 120 Hz)	5 %
U-OUT (including open- / short-circuit and double load)	60 V
Max. open circuit voltage	60 V
Mains voltage changeover threshold	According to EN 60598-2-22
Max. casing temperature tc	80 °C
Ambient temperature ta at ≤ 25 W (2)	-25 ... +50 / -25 ... +40 °C
Ambient temperature ta at > 25 W (2)	-25 ... +45 / -25 ... +35 °C
Mains surge capability (between L - N)	1.2 kV
Surge voltage at output side (against PE)	2.4 kV
Mains surge capability (between L/N - PE)	2.4 kV
Lifetime	up to 100,000 h
Guarantee	5 Year(s)
Dimensions L x W x H	130 x 43 x 30 mm

⁽¹⁾ Depending on the selected output current.
⁽²⁾ Ambient temperature with strain relief: ta max. (≤ 25 W) = 40 °C, ta max (> 25 W) = 35 °C

Specific technical data
Type	Number of battery cells	Output current (1) (2)	Min. output voltage	Max. output voltage	Max. output power	Typ. power consumption (at 230 V, 50 Hz)		Typ. current consumption (at 230 V, 50 Hz)		I-SELECT resistor value (4)
Type	Number of battery cells	Output current (1) (2)	Min. output voltage	Max. output voltage	Max. output power	Min. load (3)	Max. load (3)	Min. load (3)	Max. load (3)	I-SELECT resistor value (4)
Normal operation
EM pLED BASIC FX 102 SC LiFePO4 32W 50V	–	350 mA	15 V	50 V	17.5 W	10.0 / 9.0 W	23.0 / 22.0 W	55 / 50 mA	110 / 105 mA	–
EM pLED BASIC FX 102 SC LiFePO4 32W 50V	–	400 mA	15 V	50 V	20.0 W	11.0 / 10.0 W	26.0 / 25.0 W	60 / 55 mA	120 / 115 mA	12.50 kΩ
EM pLED BASIC FX 102 SC LiFePO4 32W 50V	–	450 mA	15 V	50 V	22.5 W	12.0 / 11.0 W	28.5 / 27.5 W	65 / 60 mA	130 / 125 mA	11.11 kΩ
EM pLED BASIC FX 102 SC LiFePO4 32W 50V	–	500 mA	15 V	50 V	25.0 W	12.7 / 11.7 W	31.0 / 30.0 W	67 / 60 mA	135 / 130 mA	10.00 kΩ
EM pLED BASIC FX 102 SC LiFePO4 32W 50V	–	550 mA	15 V	50 V	27.5 W	13.7 / 12.7 W	34.0 / 33.0 W	70 / 65 mA	155 / 150 mA	9.09 kΩ
EM pLED BASIC FX 102 SC LiFePO4 32W 50V	–	600 mA	15 V	50 V	30.0 W	14.7 / 13.7 W	37.0 / 36.0 W	75 / 70 mA	165 / 160 mA	8.33 kΩ
EM pLED BASIC FX 102 SC LiFePO4 32W 50V	–	650 mA	15 V	50 V	32.5 W	15.7 / 14.7 W	39.5 / 38.5 W	80 / 75 mA	180 / 165 mA	7.69 kΩ
EM pLED BASIC FX 102 SC LiFePO4 32W 50V	–	700 mA	15 V	46 V	32.5 W	16.0 / 15.0 W	39.2 / 38.2 W	80 / 75 mA	175 / 170 mA	0.00 kΩ
Emergency operation
EM pLED BASIC FX 102 SC LiFePO4 32W 50V	1	–	15 V	50 V	2.3 W	–	–	–	–	–
EM pLED BASIC FX 102 SC LiFePO4 32W 50V	3	–	15 V	50 V	2.3 W	–	–	–	–	–

⁽¹⁾ Output current is mean value.
⁽²⁾ The table only lists a number of possible operating points but does not cover each single point. The output current can be set within the total value range in 1-mA-steps.
⁽³⁾ Charging / Not charging
⁽⁴⁾ Not compatible with I-SELECT (generation 1). Calculated resistor value.

Document	Size	Date

Data sheet	2.25 MB	30/10/2023
Smart booklet – Emergency Let emergencies be our problem	5.38 MB	22/05/2023

Further information

Type	Article number	Certificates
Certificates / declarations of conformity

		Certificates ()

Document	Country	Size	Date of issue

				new

Strain-relief set 43x30mm Accessories

Approval marks:

ACU SC 30x43x30mm CLIP-ON SR SET (28001168, non-pre-assembled)
ACU SC 30x43x30mm CLIP-ON SR SET 300 (28001351, non-pre-assembled, 300 pcs. packaging)
ACU SC 30x43x30mm CLIP-ON SR PA (28001699, pre-assembled)
ACU SC 15x43x30mm CLIP-ON SR PA (28001574, pre-assembled)

Product description

Optional strain-relief set for independent applications
Transforms the LED driver into a fully class II compatible LED driver (e.g. ceiling installation)
Easy and tool-free mounting to the LED driver, screwless cable-clamp channels for long strain-relief (30 x 43 x 30 mm)
With screws for short strain-relief (15 x 34 x 30 mm)
Overall length = length L (LED driver) + 2 x 30 mm (long strain-relief set), 2 x 15 mm ( short strain-relief) or long and short strain-relief any combination
Standard SC (L = 30 mm) available as non-pre-assembled and pre-assembled
Short SC (L = 15 mm) only pre-assembled available

Ordering data
Type	Article number	Packaging, carton (1)	Packaging, outer box	Weight per pc.
ACU SC 43x30mm CLIP-ON SR SET	28001168	10 pc(s).	500 pc(s).	0.038 kg
ACU SC 43x30mm CLIP-ON SR SET 300	28001351	300 pc(s).	300 pc(s).	0.038 kg
ACU SC 30x43x30mm CLIP-ON SR PA	28001699	10 pc(s).	500 pc(s).	0.021 kg
ACU SC 15x43x30mm CLIP-ON SR PA	28001574	10 pc(s).	1,200 pc(s).	0.010 kg

CAD / RAY
Type	Article number	CAD Files
ACU SC 43x30mm CLIP-ON SR SET	28001168	CAD (3.7 MB)
ACU SC 43x30mm CLIP-ON SR SET 300	28001351	CAD (3.7 MB)
ACU SC 30x43x30mm CLIP-ON SR PA	28001699	CAD (3.7 MB)
ACU SC 15x43x30mm CLIP-ON SR PA	28001574	CAD (3.2 MB)

I-SELECT 2 PLUG PRE / EXC Accessories

Product description

Ready-for-use resistor to set output current value
Compatible with LED driver featuring I-select 2 interface; not compatible with I-SELECT (generation 1)
Resistor is base insulated
Resistor power 0.25 W
Current tolerance ± 2 % additional to output current tolerance
Compatible with LED driver series PRE and EXC

Example of calculation

R [kΩ] = 5 V / I_out [mA] x 1000
E96 resistor value used
Resistor value tolerance ≤ 1 %; resistor power ≥ 0.1 W; base insulation necessary
When using a resistor value beyond the specified range, the output current will automatically be set to the minimum value (resistor value too big), respectively to the maximum value (resistor value too small)

Ordering data
Type	Article number	Colour	Marking	Current	Resistor value	Packaging, bag	Weight per pc.
I-SELECT 2 PLUG 350MA BL	28001110	Blue	0350 mA	350 mA	14.30 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 375MA BL	28001111	Blue	0375 mA	375 mA	13.30 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 400MA BL	28001112	Blue	0400 mA	400 mA	12.40 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 425MA BL	28001251	Blue	0425 mA	425 mA	11.80 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 450MA BL	28001113	Blue	0450 mA	450 mA	11.00 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 475MA BL	28001252	Blue	0475 mA	475 mA	10.50 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 500MA BL	28001114	Blue	0500 mA	500 mA	10.00 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 525MA BL	28001960	Blue	0525 mA	525 mA	9.53 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 550MA BL	28001115	Blue	0550 mA	550 mA	9.09 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 600MA BL	28001116	Blue	0600 mA	600 mA	8.25 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 650MA BL	28001117	Blue	0650 mA	650 mA	7.68 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG 700MA BL	28001118	Blue	0700 mA	700 mA	7.15 kΩ	10 pc(s).	0.001 kg
I-SELECT 2 PLUG MAX BL	28001099	Blue	MAX	MAX	0.00 kΩ	10 pc(s).	0.001 kg

CAD / RAY
Type	Article number	CAD Files
I-SELECT 2 PLUG 350MA BL	28001110	CAD (712.6 KB)
I-SELECT 2 PLUG 375MA BL	28001111	CAD (712.6 KB)
I-SELECT 2 PLUG 400MA BL	28001112	CAD (712.6 KB)
I-SELECT 2 PLUG 425MA BL	28001251	CAD (712.6 KB)
I-SELECT 2 PLUG 450MA BL	28001113	CAD (712.6 KB)
I-SELECT 2 PLUG 475MA BL	28001252	CAD (712.6 KB)
I-SELECT 2 PLUG 500MA BL	28001114	CAD (712.6 KB)
I-SELECT 2 PLUG 525MA BL	28001960	CAD (712.6 KB)
I-SELECT 2 PLUG 550MA BL	28001115	CAD (712.6 KB)
I-SELECT 2 PLUG 600MA BL	28001116	CAD (712.6 KB)
I-SELECT 2 PLUG 650MA BL	28001117	CAD (712.6 KB)
I-SELECT 2 PLUG 700MA BL	28001118	CAD (712.6 KB)
I-SELECT 2 PLUG MAX BL	28001099	CAD (712.6 KB)

Test switch EM2 Accessories

Approval marks:

Product description

For connection to the emergency lighting unit
For checking the device function
Dielectric strength: 1,500 V AC for 60 seconds

Ordering data
Type	Article number	Packaging, bag	Packaging, carton	Weight per pc.
Test switch EM 2	89805277	25 pc(s).	600 pc(s).	0.009 kg

CAD / RAY
Type	Article number	CAD Files
Test switch EM 2	89805277	CAD (1009.0 KB)

Status indication green LED EM Accessories

Approval marks:

Product description

A green LED indicates that charging current is flowing into the battery

Ordering data
Type	Type	Article number	Packaging, bag	Packaging, carton	Weight per pc.
LED EM	green	89899605	25 pc(s).	200 pc(s).	0.011 kg
LED EM	green, ultra high brightness	89899756	25 pc(s).	200 pc(s).	0.012 kg

CAD / RAY
Type	Article number	CAD Files
LED EM	89899605	CAD (579.9 KB)
LED EM	89899756	CAD (579.9 KB)

Connection cable LiFePO4 Accessories

Product description

Extension cable for LiFePO4 batteries
Cable length 500 mm
3-pole plug connection

Ordering data
Type	Article number	Packaging, bag	Packaging, carton	Weight per pc.
EXTENSION CABLE LiFePO4 500mm	28002461	10 pc(s).	200 pc(s).	0.01 kg

CAD / RAY
Type	Article number	CAD Files
EM pLED BASIC FX 102 SC LiFePO4 32W 50V	89800687	CAD (1.0 MB)

EPD
Type	Article number	Environmental Product Declaration (EPD)
EM pLED BASIC FX 102 SC LiFePO4 32W 50V	89800687	EPD

EM powerLED BASIC FX SC LiFePO4 32 W

Product description

Functions

Battery management

Batteries

Further information

Certificates for ()

Strain-relief set 43x30mm Accessories

Product description

I-SELECT 2 PLUG PRE / EXC Accessories

Product description

Example of calculation

Test switch EM2 Accessories

Product description

Status indication green LED EM Accessories

Product description

Connection cable LiFePO4 Accessories

Product description